PUMP HANDBOOK: CORE TECHNICAL TERMS

Many people only know that pumps are used to transfer water, but in industry, understanding technical specifications is the key to safe and economical operation. This article will explain the basic terms it is based on Japanese Industrial Standard (JIS B 0131) Helps you choose and use the pump most effectively.

1. Flow (Capacity / Discharge)

Flow rate is the volume of liquid that a pump can transport in a given unit of time.

  • Common symbols: Q
  • Unit: m³/minute, m³/hour, or liter/second.
  • Meaning: This index shows how “strong” the pump is in terms of water supply flow.

2. Total Head

In engineering, we don’t simply use the word “height”. Total pressure head. This is the total energy (force) required by the pump to push the liquid from point A to point B.

  • Includes:
    • Actual height difference (Static Head).
    • Pressure loss due to friction in the suction and discharge pipes.
    • Pressure flow velocity.
  • Meaning: Decide whether the pump has enough power to push water to the required height or distance.

3. Hydraulic power (Liquid Power)

This is the actual amount of energy the pump transfers to the fluid.

  • Note: It is different from the electrical power consumed by the motor. Hydraulic power is only calculated based on the amount of useful energy that helps the fluid move and increase pressure.

4. Pump Efficiency

Performance is a comparative ratio between Useful energy(hydraulic capacity) and Total energy supplied(axle power).

  • Meaning: The higher this index, the less energy the pump wastes, significantly reducing operating costs.

5. Specific Speed –Ns)

This is a number that represents the design shape and operating characteristics of the pump impeller.

  • Application: Lean on Ns, engineers can determine whether it is a centrifugal pump, an axial pump or a mixed pump.

6. Suction Specific Speed –S)

This index evaluates the pump’s suction ability and operating safety on the inlet side.

  • Cavitation Phenomenon: If this index does not meet the standard, air bubbles will form, causing a small explosion inside, pitting the impeller and damaging the pump.
  • Meaning: The more optimal the index, the lower the risk of damage due to cavitation.

Summary of operating procedures:

  1. Suction Side: The fluid is directed into the center of the impeller.
  2. Pump Body: Energy is transferred from the motor to the fluid.
  3. Discharge side: The liquid is pushed out at high pressure and velocity.
Tips: Understanding these terms not only helps you read the product catalog but also helps you communicate more professionally with equipment suppliers.

T&C INDUSTRIAL DISTRIBUTION JOINT STOCK COMPANY (TCID)