Distinguish and select the Ebara FSA pump model based on the characteristics of pressure head and flow of the project.

Genuine distributor T&C Industrial Distribution (T-CID)

In the design of industrial water supply and fire protection systems, the correct selection of the model code of the separate horizontal shaft centrifugal pump line is important.Ebara FSA Seriesplays a key role. Each model in the FSA series possesses unique hydraulic characteristics, optimized for different flow (Q) and head (H) ranges. From a technical perspective, understanding the characteristics of each model range will help M&E engineers make accurate decisions, ensuring optimal operating performance for the project.

1. Distinguishing characteristics of Ebara FSA model segments

  • The FSA pump line is divided into many different frame sizes and capacities based on suction/discharge diameter and impeller structure:
  • Medium flow model group (Medium throat size):Usually suitable for small and medium-sized factory water supply systems or as a pressure compensation pump/main pump for standard-sized fire protection clusters. This group stands out for its ability to maintain stable high pressure head in the medium flow range.

  • High flow and high head model group (Large throat size):Specially designed for urban water supply pumping stations, heavy industrial plants or large-scale fire protection systems (such as logistics warehouses, large manufacturing plants) that require extremely abundant water flow.

2. Overview comparison table and actual model code list in the Ebara FSA line

Model FSA segment Actual Model Code Symbol Suction / Exhaust Throat Characteristics Typical Flow Range (Q) & Pressure Head (H). Optimal Practical Application
High Pressure Head – Medium Flow Group 50x40 FSGA, 65x50 FSHA, 65x50 FSJA, 80x65 FSKA, 80x65 FSLA Medium (DN 50 – DN 80) Low to Medium / High Head Standard fire protection system, water supply to high pressure tanks, industrial booster pump stations.
Balance Group (Flow & Pressure Head) 80x65come100x80(Standard configuration) Economy (DN 80 – DN 100) Medium to Quite large / Stable pressure head Synthetic water supply for factories, cooling water circulation systems, HVAC.
High Traffic Group (Heavy Motor) 100x80 FSNA, 100x80 FSPA, 125x100 FSUA, 125x100 FSVA, 150x125 FSWA Large (DN 125 to DN 150 or more) Large to Very Large / Medium to high pressure head Raw water pumping station, large capacity fire protection system for industrial parks, urban water supply.
  • (Technical note: The letter symbols following the pump throat size code on the FSA series such as GA, HA, JA, KA, LA, NA, PA, UA, VA, WA represent fine-tuning of the impeller diameter or engine frame configuration, helping engineers easily look up the exact Q-H working point according to the project drawing).

3. Model selection principles are based on project characteristics

  • For fire protection system:It is necessary to compare carefully with the characteristic curve chart (Q-H curve) of each model. Priority should be given to choosing model codes with large curve slopes so that when the water flow suddenly increases (opening multiple nozzles at the same time), the output pressure does not drop beyond the allowable threshold of fire prevention standards.

  • For industrial water supply systems:It is necessary to accurately calculate the total pipe resistance and the actual working point so that it falls within the highest performance area (Best Efficiency Point – BEP) of the selected model, helping to maximize operating power savings and prolong equipment life.

Conclusion from the expert

  • Choosing the right Ebara FSA model not only helps the system operate durably and safely, but also optimizes initial investment costs and operating costs (TCO).
  • You need to look up the details of the Q-H characteristic curve for a specific Ebara FSA model code according to the project drawing?Please contact our technical team immediately to receive the most accurate design specifications!

CONTACT YOUR TECHNICAL SUPPORT REPRESENTATIVE AND QUOTE

General Distributor T&C Industrial Distribution (T-CID)
📞
Technical contact hotline: 0903 071 804
📍
Warehouse general agent address:384/42 Nam Ky Khoi Nghia, Xuan Hoa Ward, City. Ho Chi Minh
🌐
Look up online catalogs: Ebaravietnam.vn